| Type | mCCR: oxygen flows in via CMF or a needle valve, as close to your metabolic rate as possible; you add the rest by hand with the MAV | eCCR: a solenoid holds the PO₂ | eCCR: solenoids hold the PO₂, automated checks |
| Mounting | Sidemount, carried like a stage; also alongside twins or backmount | Sidemount, clipped to the harness at two points; can also be used with backmount | Backmount; counterlungs over the shoulder or on the back |
| Certification | CE certification planned for 2027 | CE to EN 14143: to 40 m on nitrox, to 100 m on trimix | CE to EN 14143: to 100 m |
| Size | about as tall as a 2 L and as thick as a 3 L cylinder | no bigger than an 80 cu ft aluminium cylinder | – |
| Weight | about 5 kg | 16.5 kg without absorbent | from 18 kg ready to dive, from 9 kg travel weight |
| Scrubber | axial, 1.9 kg | radial, 2.5 kg | axial, up to 2.5 kg |
| Scrubber duration (manufacturer) | up to 4 h, depending on the dive | 180 min per the manual | about 180 min |
| Counterlung | one, 5.4 L, between chest and side | two of 2.3 L, inside the housing | two, over the shoulder or on the back |
| Cylinders | variable, mainly off-board | oxygen 2 L inside the housing, diluent fed from outside | two 3 L cylinders for oxygen and diluent |
| Electronics | no controller in the unit; 3 sensors, read out on Shearwater or Halcyon | Shearwater DiveCAN with Petrel 3 or NERD 2, 3 sensors | M28 computer, 2 sensors (3rd optional), checks before and during the dive |
| Mouthpiece | DSV | DSV | BOV with HUD |
| Power | no battery in the unit | AAA lithium battery | Li-ion battery, up to 30 h |
| Water temperature | 4 to 34 °C | 4 to 34 °C | 4 to 35 °C |
| Travel | fits in half a cabin suitcase | splits into four modules | can go as carry-on, from 9 kg |
| Origin | designed in England (Andrew Goring), made in Portugal | Poland, designed by Andrzej Pałucha | Sweden, since 2012 |